Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit. This is a center take-off style rack and pinion that utilizes an offset ball center bar which duplicates the stock center link; this means that the rack matches the exact geometry of the original front suspension. The rack comes mounted to a one-piece mounting bracket which replaces the tubular cross member located directly behind the front suspension. Since the racks are center take-off style, Unisteer offsets the rack on the mounting bracket; moving the pinions closer to the driver-side frame which makes connection of the steering linkage to a column as easy as possible.From a steering standpoint, Unisteer found that the early Mustangs split mid-1967 and there were slight differences, so make sure you order the correct kit! Additionally, later model Mustangs and Cougars may look the same but are NOT. The kit will work on Small Block & Big Block cars, and have been successfully used with Stock Manifolds, and Hooker Super Comp Headers. Other Headers may work, but we can't guarantee an easy install. This kit requires the use of a mini starter.
This kit may require some modifications on Mustangs with Dart Heads and other Aftermarket Heads requiring different headers. Note: If you have a 351C motor you will need to use Headman headers. Contains a 9/16-26 spline shaft. 4.5 rotations lock to lock. Overall width from tip to tip of tie rod threads = 39.
Center to center of mounting locations is 19 3/8. This kit will fit Small Block application. Per vendor info, it will also work with a big block application provided that a Hooker Super Comp header is used. Other headers used may lend to clearance issues. If you have a 351C engine you will need to use Hedman Headers.Outer tie rod ends are no longer included with this kit. The rack has been redesigned so that the inner ends are female to accept the male OE/Factory outer tie rod ends. Outer Tie Rod Ends Included. Inner Tie Rod Ends Included. Outer tie rod ends are not included, this kit is designed to accept OE outer tie rod ends.
Related Items / Suggested Parts. Ididit 1300644010 1968 Mustang Tilt Steering Column, Plain Steel. Ididit 1300644020 1968 Mustang Tilt Steering Column, Chrome.Ididit 1300645010 1968 Mustang Tilt Steering Column for Rack & Pinion. Ididit 1300647010 1969 Mustang Tilt Steering Column for Rack & Pinion. 1967-69 Mustang Outer Tie Rod End. Please take advantage of the "add to cart" button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is America's Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 71 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Gearboxes, Rack & Pinions".
The seller is "speedway_motors" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.