Works with all SEAFLO marine toilets. Directly replaces manual pump assembly.
Self priming up to 2ft (0.6m). Regular power consumption is 1.0 amp hour at 12V. Meet SEAFLO's brand new manual to electric marine toilet conversion kit.The SEAFLO SFMTP1-02 is the most economical and reliable way to do convert your current manually operated toilet to electrically operated. The self-priming pump rinses the bowl while the waste pump macerates and evacuates the waste. Add the luxury of an electric head without the costly and hassle by converting your existing toilet with an electric flush kit. Converts manual head to electric operation A built-in backflow preventer guards against flooding and waste return Simple to operate Waste pump discharges over an anti-syphon loop up to 6ft (1.8m) and thru-hull fitting 3ft (0.9m) below the surface Simple rotary control for'flush & discharge' or'discharge only' Self-priming pumps permit installation above or below waterline Manual pump easy to refit if power supply fails Multi-angle discharge elbow for ease of installation Accessible mounting points for faster installation All fastenings face front or top for superbly simple servicing without need for special tools Can be mounted 3' (1m) above or below the waterline with appropriate plumbing Positively located gaskets ensure correct re-assembly Corrosion-resistant materials throughout permit fresh or salt water service Typical power consumption is less than 1.0 amp hour(12 volt) per day. Model: SFMTP1-02 Type: Electric Control Type: Rotary Control Size: Compact Voltage: 12V Amp Draw: 20A Inlet: 3/4" Discharge: 1-1/2" Weight: 6 lbs.