Manual Steering to Power Steering Conversion Kit Borgeson 999062

  
Steering Box - Power - Iron - Black Paint - Ford Car 1949-51 - Each. Steering Ratio: 14:1 ratio.

Inlet Fitting Size: 16mm x 1.5. Return Fitting Size: 16mm x 1.5. Minimum Flow Rate: 2 GPM. Maximum Flow Rate: 2.5 GPM. Power Steering Pump Brackets Included: Yes.

Steering Box Mount: Bolt On. True modern power steering feel, quick steering ratio with fewer turns lock-to-lock, complete kits with mostly bolt-on installations. All new components, nothing remanufactured. Assembled and tested in the USA. This power steering box is designed to replace the original manual box via a bracket which bolts to both the original frame and the new steering box. Our special pitman arm allows it to connect to either the original steering linkage or the highly recommended and vastly improved tie rod and idler arm conversion offered by Fatman Fabrications. The new box can be connected to either an aftermarket steering column, or the original steering column, including the shift levers, can be shortened to fit this box by using our optional Column Saver kit #990044. NOTE: Not for use with a Flathead engine.

We do not accept P. Please provide a physical address which is recommended. Items deemed missing/or lost in transit from carrier, a claim must be filed. Note: Photos do not always represent the actual product. For kits, photo might show entire kit and listing is only for one component.

If in doubt, please reach out to our customer service team. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Other Steering & Suspension Parts". The seller is "drivarautoparts" and is located in this country: US. This item can be shipped to United States.

1. Brand: BORGESON
2. Manufacturer Part Number: 999062
3. Weight: 32.9
4. Length: 16.5
5. Width: 16.38
6. Height: 8.75
7. Attribute/Feature 1: Manual / Power: Power
8. Attribute/Feature 2: Box Style: Ford
9. Attribute/Feature 3: Steering Ratio: 14:1 ratio
10. Attribute/Feature 4: Input Spline: 11/16-36 in
11. Attribute/Feature 5: Inlet Fitting Size: 16mm x 1.5
12. Attribute/Feature 6: Inlet Fitting Style: Female
13. Attribute/Feature 7: Inlet Fitting O-Ring: Yes
14. Attribute/Feature 8: Return Fitting Size: 16mm x 1.5
15. Attribute/Feature 9: Return Fitting Style: Female
16. Attribute/Feature 10: Return Fitting O-Ring: Yes
17. Attribute/Feature 11: Maximum Pressure: 1450 PSI
18. Attribute/Feature 12: Minimum Flow Rate: 2 GPM
19. Attribute/Feature 13: Maximum Flow Rate: 2.5 GPM
20. Attribute/Feature 14: Power Steering Pump Brackets Included: Yes
21. Attribute/Feature 15: Pitman Arm Included: Yes
22. Attribute/Feature 16: Steering Box Mount: Bolt On
23. Attribute/Feature 17: Mounting Bolt Quantity: 3
24. Attribute/Feature 18: Material: Cast Iron