F2B Pedal Conversion Kit Swap a manual transmission in your'77'96 B Body

  

We are offering the necessary brackets to allow the experienced enthusiast to perform a bolt-in installation of the Camaro or Firebird T-56 6-speed transmission hydraulic clutch into the 1991 - 1996 GM "B" Body chassis. Now updated to include 1977- 1990 B-Body chassis. This kit is intended as a means for those do-it yourselfers to obtain the most difficult to fabricate parts for the changeover by adapting an F-car swinging pedal assembly to the B-car chassis.

The user can then acquire the transmission, cross-member, and related driveline parts from other sources at a time and cost they deem appropriate. This kit consists of 5 custom fabricated pieces. The main pedal bracket that adapts the F-Body pedals to the B-Body floorpan. An upper bracket to tie the F-Body pedal assembly to the cowl above. A convenience center relocation bracket to make room for the clutch pedal switches.

A clutch master cylinder reservoir mounting bracket. A shifter bracket, which serves to move the shift handle rearward by 2.5 inches. Also included are necessary fasteners, foam to seal the firewall junction and an instruction sheet.

For reference, to complete your manual transmission installation you will still need to obtain the following new or salvage yard sourced components. LT1 flywheel and clutch assembly.

Aftermarket T56 cross-member (available from several sources). A complete LT1 style (1993 - 1997) T-56 transmission. Also plan on some additional electrical work to include transmission connector and cruise control rewiring and a PCM re-flash to accommodate the new transmission.