Cnc Lathe Conversion Kit For The Grizzly, Harbor Freight, Lms, Sieg 7x16 Lathes

  
If you have been needing a kit for your 7x16 sieg style lathe. Dont miss out for this is my absolute last kit.

After 15 years i don't plan on making any more. Lathe not included For Demo only. A Buyers Only for this listing.

THIS CNC CONVERSION KIT IS MADE IN THE U. I Will need to know the BRAND LATHE before I can assemble this kit. This kit comes standard with 1/4 I. COUPLERS unless you tell me different.

Any size up to 3/8 I. If needed just let me know ASAP before I start assembly. I THANK-YOU IF YOU ARE CONSIDERING MY CNC MINI LATHE CONVERSION KIT. This kit comes with Ballscrew on the X & Z Axis.

This listing is for one complete mechanical conversion of your Sieg manufactured mini lathe to Computer Numerical Control. This kit is well designed, and manufactured with care to produce the best quality results possible for the investment.

The installation is simple, but requires a careful attention to the details of hole-placement. It is well within the scope of abilities of anyone with a realistic objective to learn CNC. It requires drilling and tapping 9 holes and opening up another for clearance. It will take about an afternoon to install.

These new tapped holes are larger and stronger than the original which will omit movement and make for a good solid mount. The Z axis will gain several more inches of travel movement on the bed end once the original mount is removed and the new mount is installed.

This kit is constructed from machined aluminum parts which features an attractive machine finish that looks Great on this setup. The bearings are high quality, and sealed for longevity.

New 1204mm Ballscrew Design for both axis. 2ea Oldham style Couplers with 1/4 I.

Are included with the kit. This kit allows you to retain manual control of the Lathe, providing that dual-shaft motors are used.

I have a link but i do not sell them. This kit will work Great with NEMA 23 size steppermotors 1/4 SHAFT (270oz up to 420 oz if preferred) range or servo motors and will come stock with 1/4 I. CONTROLLER AND STEPPER MOTORS NOT INCLUDED. This kit is crafted with care by an experienced tool and die maker to provide years of service for any enterprising individual that wishes to explore CNC and or make useful parts on a really great little machine.

The kit includes all mounting hardware necessary for installation, and uses existing holes for mounting whenever possible, but does require drilling and tapping of some of them, as it would be impractical to design the kit around the hole placement of the manual parts.. The design favors utility over absolute installation simplicity, but makes no compromises that should inhibit the serious user from installing the kit............ Thank you for considering this item, and please feel free to contact me with any inquiries............... SEE FEEDBACK LEFT ON THIS ITEM.