11" Cross-Drilled Slotted Rotors 5 x 4.75" (Chevy Pattern). Red Wilwood D-52 Loaded Calipers.
Caliper Brackets & Mounting Pins. Disc Drum Proportioning Valve kit. Stainless Braided Caliper lines with Banjo Fittings (4777). Wilwood's D52 Front Caliper Kit is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design.D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers.
The front calipers with 2.00 piston provide 6.28 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain Wilwood's hardened slide pins and BP-10 high friction pads. Caliper Finish: Powder Coated Red. Inlet Fitting: 7/16-20 Inlet Thread Size. Rotor Thickness: 1.04 Finish.
Powder Coated Material Type: Aluminum. Total Piston Area: 6.28 sq. Pad Volume: 3.9 cu. Installation of this kit is very straight forward, but we do recommend professional installation with any brake parts. We do not offer instructions with this kit, but 100's of websites have detailed information on these kits.